What is Physical Intervention Training?
IntroductionPhysical Intervention Training is one of the several courses that make up SIA training. This portion of the training is designed to give professionals and SIA applicants a wide variety of non-violent handling abilities that will enable them to deal with everyday scenarios that may require physical contact inside licenced premises.While the Physical Intervention Training modules don�t concentrate on comprehensive techniques that address every scenario that might arise, they do concentrate on a strong foundation of knowledge and abilities that will enable an SIA operative to significantly lower any risk to staff and customers during any conflict.Modules for physical intervention training include:Recognising the professional and legal ramifications of physical interventions.Understanding how to lower the danger of injury when using physical intervention techniques.Knowing how to defend oneself and others from harm through physical abilities unrelated to painUnderstanding how to employ restrictive and non-restrictive standing, holding, and escorting strategies that are not painful. Without adequate conflict management training, every front-line security operative�s education is lacking. Conflict management is a crucial element of a successful front-line security team. Still, it is typically taught after the legal and theoretical topics have been covered and only when the use and functions of a security management team become pertinent.Physical Intervention in The IndustryDoor Staff, often known as bouncers, are the main representatives of this business and are frequently used as a form of deterrence to subtly persuade patrons to behave. However, there are specific circumstances where it is necessary to act violently against people who disobey the norms of licenced establishments.Force, in its entirety, should only be used as a last resort in conflict resolution. Even in situations where physical involvement is entirely essential, according to SIA training, it must be used with minimal force necessary to prevent further violence.It should be remembered that it is feasible to intervene physically in conflict without force.The SIA emphasises that everyone is subject to the law, including security personnel, and stresses the significance of laws and regulations governing both physical intervention and the concept of conflict management as a whole. When performing their daily security duties within licenced facilities, security officers are guaranteed to follow the law by using only a reasonable level of force and only when necessary.Physical Intervention training aims to provide information for private security personnel to respond appropriately to violent circumstances. The entire instruction, which includes information delivery and practical training, shows that an aggressive situation can be handled just as successfully by taking a step back and taking a non-aggressive stance.Restraining VS ControlSimple restraining measures that can be employed by security personnel when restricting or managing an excessively violent person are necessary to avert an incident may also be included in any physical intervention.It requires the application of some force despite being an utterly non-aggressive task. Still, it also gives violent people the chance to assess their current state of mind and the violent behaviours they were about to commit. In many circumstances, the agitated person realises what they are going to do is wrong and calms down to adopt a more appropriate tone.Each security expert must be able to apply the same standards as and when necessary because these are moral problems.The entire application process must be appropriately scheduled to minimise the possibility of harm and dispute. The secret to intervention training without causing any pain is this in and of itself.Not that ejections are never necessary, but even in dire situations, security personnel should never use force when such action is called. They should be appropriately detained without pain or excessive force, and under no circumstances should any form of violence be used. Applying physical intervention correctly necessitates using little force and causing little discomfort while restrained. Back-up should be requested if someone is not calming down or becomes highly belligerent.Everyone who has chosen security as a career should carefully study and use this principle since failing to follow the necessary standards and rules can result in a case being filed, and those who happen to overstep the bounds may face criminal charges in addition to losing their jobs.The Physical Intervention module aims to equip candidates with the proper knowledge and skills to deal with typical problems more effectively and safely without resorting to violence. Attempting to establish a strong foundation on which the security personnel may successfully cope with hostile visitors.Level 2 Physical Intervention Refresher TrainingHurak Education Services is one of the very few security training providers that are approved by the SIA to deliver the Level 2 Physical Intervention Refresher Training for the Private Security Industry programme.The skills are designed and delivered in line with the home office-approved techniques and aim to use minimum force. By completing this course with us candidates are able to deliver the Level 2 Physical Intervention Skills for the Private Security Industry programme through any approved Awarding Body that offers the SIA suite of qualifications.
CSCS Card Types: Figure Out Which One Is Right For You
If you're looking to work in the construction industry in the UK, you may have heard of a CSCS card. There are many types of CSCS cards and it might be daunting at first to understand which one is right for you.In this blog post, we'll take a closer look at the different types of CSCS cards available. So whether you're just starting out in the industry or looking to progress your career, keep reading to find out more about this essential certification.Before moving on to discussing the CSCS card types, let�s first learn about CSCS.What is CSCS? CSCS stands for�Construction Skills Certification Scheme. It�s a recognised certification body in the UK, that approves its holders for their occupational competence in the construction sector. CSCS has made it easier for employers to employ construction workers, who have undergone appropriate training and relevant qualifications to work on a site.To learn more about CSCS, check out our blog or visit their official site.What is a CSCS Card?A CSCS (Construction Skills Certification Scheme) card is a type of certification that confirms an individual's qualifications and training required to work in the UK�s construction industry. The card acts as evidence that the holder has obtained the required knowledge, skills, and understanding to carry out their job safely and competently on a construction site.Despite the fact that holding a CSCS card is not a legal requirement, the demand for CSCS cards is very high in the UK�s construction industry. In fact, many construction and building sites won�t even hire workers without a CSCS card. This fosters a safety culture in a construction site, minimising the chances of accidents and injuries.CSCS Card Types: All You Need to Know About the Different CSCS CardsThere are different CSCS cards, each reflecting the different levels of skill and competence in the construction industry. Each card represents a different occupation or role within the sector, ranging from labourers and apprentices to supervisors and managers.These cards are categorised based on their colours (Green, Blue, Gold, White, Black, and Red). Some cards have been withdrawn by CSCS, they can still be used as long as they are valid, but cannot be renewed.Deciding on which card specifically aligns with your career objectives might be tough for you. Hopefully, the table below can help you to decide which card to go for.CSCS Green CardA CSCS Green Card is designed for individuals working in labouring occupations within the construction industry, such as general labourers, cleaners, plumbers, carpenters and bricklayers. Having this card shows that the individual has a basic level of knowledge and understanding of health and safety in the workplace. It�s one of the most popular cards amongst the list of CSCS Card types.It is not a legal requirement, but many construction employers require it as proof of a worker�s competence and commitment to health and safety in the workplace. So, if you hold a Green Card, you have an advantage over others and you�re more likely to get employed.Eligibility Criteria to Get a CSCS Green CardTo be eligible for a CSCS Green Card, you must:Achieve an RQF Level 1 Award in Health and Safety in a Construction Environment (or recognised alternative)Pass the CITB Operatives HS&E TestApply for a CSCS Green CardThe first step to getting a CSCS Green Card is to enrol on a relevant qualification. At Hurak Learning, we offer the CSCS Green Card (Labourers Card) Course that prepares you well for the next step, the CITB Operatives HS&E Test. It�s a multiple-choice test, valid for two years. After having completed the relevant qualification and having passed your CITB Operatives HS&E test, you can then apply for a CSCS Green Card on the official website with proof of your qualification and a CITB test ID number.Taking a free CSCS mock test is recommended before you attempt a real CITB HS&E test. It will help you test your knowledge and evaluate if you�re fully prepared to attempt the real test.Validity of a CSCS Green CardThe CSCS Green Card is valid for five years and must be renewed before it expires. To renew the card, the individual must retake the CITB Operatives HS&E Test and provide evidence of any additional qualifications they have obtained since their last application.Note, some qualifications, like the Level 1 Award in Health and Safety in a Construction Environment do not expire. So to renew your CSCS card if you have completed the Level 1 H&S course in the past you just need to pass the CITB Operatives HS&E Test and apply for the card. .second-cta-block .main-heading { font-weight: bold; font-size: 22px; } .second-cta-block .book-now { background: #DF3D52; color: #FFFFFF !important; border-radius: 8px; } .second-cta-block .second-heading { font-size: 17px; } .second-cta-block .card { border: 0 !important; } .second-cta-block .card-body { border: 1px solid #909090; box-shadow: rgba(0, 0, 0, 0.16) 0px 1px 4px; border-top-right-radius: 100px; border-bottom-right-radius: 100px; background: #ECECEC; } .second-cta-block .image-wrapper { height: 134px; position: absolute; right: -100px; top: calc(50% - 67px); /* Center the image vertically */ } .second-cta-block .image-wrapper img { height: 100%; } .second-cta-block .trustpilot-widget { width: 256px; } .cta-heading-section { width: 75%; } @media screen and (max-width:991px) { .second-cta-block { padding-top: 100px; } .second-cta-block .card-body { border: 1px solid #909090; box-shadow: rgba(0, 0, 0, 0.16) 0px 1px 4px; border-radius: 19px; border-radius: 14px; background: #ECECEC; } .cta-heading-section { width: 100%; padding-top: 50px; } .second-cta-block .image-wrapper { height: 134px; right: 0; position: absolute; left: calc(50% - 108px); top: calc(50% - 203px); } } RQF LEVEL 1 COURSE for CSCS GREEN CARD Check the Course Rated Excellent on major review sites CSCS Blue Card The CSCS Blue Card is designed specifically for skilled construction workers who have experience in services such as roofing, insulation, road-building, etc. Eligibility Criteria to Get a CSCS Blue Card To be eligible for a CSCS Blue Card, you must: Achieve an NVQ Level 2 or equivalent qualification Pass the CITB Operatives or Specialists HS&E Test Apply for a CSCS Blue Card The first step to getting a CSCS Blue Card is to obtain NVQ Level 2 or equivalent qualification relevant to the job you aim to do at a construction site. Next, you must pass the CITB Operatives or Specialists HS&E Test, which is valid for two years. Validity of a CSCS Blue Card The CSCS Blue Card is valid for five years and must be renewed before it expires. An individual must retake the CITB Operatives or Specialists HS&E Test before applying for the card.CSCS Gold CardThe CSCS Gold Card is for experienced professionals. It�s an advanced-level card intended for Advanced Crafts and supervisors within the construction industry. This card is proof that the holder of this card has the capability to supervise personnel in a construction environment.Eligibility Criteria to Get a CSCS Gold CardTo be eligible for a CSCS Gold Card, you must:Achieve an NVQ Level 3 or 4 qualificationPass the CITB Health Safety & Environment TestApply for a CSCS Gold CardThe first step to getting a CSCS Gold Card is to obtain an NVQ Level 3 or 4 qualification. After that, you must pass the relevant CITB Health, Safety & Environment Test. This test is valid for two years so you must apply for CSCS Gold Card before the test expires, or you will have to pass the exam again.Validity of a CSCS Gold CardThe CSCS Gold Card is valid for five years. To renew the card, you will have to pass the CITB Health Safety & Environment Test again before applying for it.CSCS Black CardThe CSCS Black Card is for experienced professionals. It indicates that the holder of this card has the knowledge, skills, capability, and experience to manage high-level tasks in a construction environment. It�s given to individuals who have achieved an advanced level qualification in the field of construction and also have managerial experience.Eligibility Criteria to Get a CSCS BlackTo be eligible for a CSCS Black Card, you must:Achieve a minimum of an NVQ Level 4 qualificationPass the CITB Managers and Professionals HS&E testApply for a CSCS Black CardTo obtain the CSCS Black Card, it is mandatory to pass the CITB Managers and Professionals HS&E test. This particular test requires a higher level of knowledge compared to others, as it�s meant for people who intend to lead others on a site. Therefore, a more comprehensive understanding of health and safety regulations and procedures is required.Validity of a CSCS Black CardThe validity of a CSCS Black Card is five years, after which it will need to be renewed. It is important to keep the Black Card valid, as it�s often a requirement by employers, and failure to renew the card can result in loss of work opportunities.CSCS White CardThe CSCS White Card is the highest level among all the CSCS Card types. There are two types of white CSCS cards: one for the Academically Qualified Person and the other for the Professionally Qualified Person.An Academically Qualified Person is someone who has obtained a higher level qualification in their area of expertise, such as HNDs, HNCs, CIOB Certificates, a NEBOSH diploma, or a degree. Examples of professionals who fall under this category are electrical and civil engineers.The second type is a Professionally Qualified Person, whose job role may require occasional visits to a construction site, but they are not restricted to a particular construction site. Professionals who fall under this category include architects, surveyors, and structural engineers.Eligibility Criteria to Get a CSCS White Card (Academically Qualified Person & Professionally Qualified Person)To be eligible for both types of CSCS White Cards, you must:Achieve a minimum of an NVQ Level 7 qualificationPass the CITB Managers and Professionals HS&E Test or an approved alternativeApply for a CSCS White CardApplicants of a Professionally Qualified Person White CSCS Card must also provide evidence of their current membership with a professional organisation at a level that CSCS accepts. They can submit any of the following documents:A membership cardA receipt of payment for membershipA membership certificateAn up-to-date letter or email from the professional bodyA clearly dated screenshot showing your current membershipValidity of a CSCS White CardThe White CSCS Card expires after five years. However, the Professionally Qualified Person card cannot be renewed and when expires, you have to apply for a new card just like you applied for the first time.CSCS Red CardsThere are a few different types of Red CSCS Cards. The following table will help you understand the different typesTypes of CSCS Red Card�Suitable ForValidityTraineeTrainees registered to complete a construction-related qualification.5 yearsApprenticeIndividuals who have started a CSCS-recognised apprenticeship framework4 years and 6 monthsProvisionalWorkers serving their probationary period.6 monthsExperienced WorkerWorkers enrolled on a Level 2 NVQ or higher qualification and have on-the-job experience.1 yearExperienced Technical, supervisor or ManagerExperienced technical, supervisor or managers enrolled on a Level 3 NVQ or higher qualification and have on-the-job experience.3 yearsTypes of CSCS Red CardsA CSCS Red Card is a temporary card assigned to a construction site worker. Each Red Card has a different validity ranging from 6 months to 5 years. One of the benefits of having this card is that you can still start working on site while working towards getting a skilled CSCS card.�The CSCS Red Cards cannot be renewed. Once you complete the required qualification, you can progress to a skilled Blue Card or Black Card.There are 5 types of Red Cards, and you can check out each type in detail below and figure out which one is best suited to you.Trainee CardThe CSCS Trainee Card allows you to temporarily join a construction site and continue your academic qualification in parallel. It�s valid for 5 years, and you must complete the course during this time period and progress to a CSCS skilled card.�To apply for this card, you must enrol in a recognised qualification and pass the CITB HS&E test.�Apprentice CardThe CSCS Apprentice Card is for workers who have started a CSCS-recognised apprenticeship framework. It�s valid for 4 years and 6 months.To apply for this card, you must complete an apprenticeship in a construction setting and pass a CITB test within the last two years.Provisional CardThe CSCS Provisional Card is for individuals who are new on a job and serving their probationary period. For this reason, this card is valid only for 6 months and you cannot renew it once it expires.To apply for this card, you must not have obtained any other CSCS card.Experienced Technical, Manager or Supervisor CardAs the name suggests, this card approves your skill level to be employed as an experienced technical, manager, or supervisor on the construction site. It�s valid for 3 years.To apply for this card, you must have an NVQ Level 3 or higher qualification and at least one year of on-job experience in the last three years.�Experienced Worker CardThis card is for experienced workers with at least a year of experience at the construction site. The Red Experienced Worker Card is often confused with the Experienced Technical, Manager or Supervisor Card. However, there�s a difference between the two as this card is only valid for a year and requires an NVQ Level 2 or higher qualification.To apply for this card, you must have an NVQ Level 2 or higher qualification and at least a year of experience at the construction site.How Much Does a CSCS Card Cost?The cost of getting a CSCS card is �36, which is the same for all the CSCS cards. This fee is paid to CSCS (Construction Skills Certification Scheme). The CITB health, safety, and environment test is a mandatory requirement for getting a CSCS card and it costs �23.50. Together, the total cost of your CSCS card application and CITB test is �58.50.Checkout our blog on CSCS card price to learn more about cost breakdown.Frequently Asked QuestionsHow long does it take for a CSCS card to be approved?The time it takes for a CSCS card to be approved can vary depending on the type of card being applied for and the application method used. Typically, once your application is approved, your CSCS card will be dispatched to you on the following working day. Most cards are delivered to their specified location within 3-5 working days after the approval of the application.How do I apply for a CSCS card?You can apply for a CSCS card in different ways, such as online, by post, or over the phone. The application process for a CSCS card involves providing evidence of your qualifications and passing a required health and safety test. We recommend applying online, as this is the quickest way.Is it mandatory to have a CSCS card to work in a construction company?While having a CSCS card to work on-site is not legally required, many construction companies and sites require their workers to obtain a valid CSCS card as a measure of competence and safety.Can I get a CSCS card without any qualifications?You cannot obtain a CSCS card without any qualifications, as the application process for all the cards requires evidence of your skills, qualifications, and health and safety knowledge.Are there any exemptions or discounts available for CSCS card fees?To know about the exemptions or discounts on the CSCS card fee, check the CSCS website.Can I use my valid CSCS card in other countries?CSCS cards are only recognized in the UK construction industry. However, some international construction companies may accept CSCS cards as evidence of knowledge, competence, and experience.What happens if I lose my CSCS card?In that case, you can apply for a replacement card online or by post. There is a fee for replacement cards, and it may take several days to get a new CSCS card.
The Importance of Safeguarding in Education
IntroductionMaking sure those in your charge are safe inside and outside your institution should always be your first responsibility if you work in education. You have a moral and legal obligation to respond to any indications that someone may be experiencing abuse at home or in their society.Everyone in the organisation must design and follow rigorous safeguarding policies to guarantee everything is being done to protect individuals at risk. Today�s column explores the significance of safeguarding, particularly in education.What is safeguarding?Even though everyone involved in the education industry should know the word, you might not know what safeguarding entails. Simply expressed, safeguarding refers to the actions taken to protect the health, happiness, and human rights of those entrusted to your care. Safeguarding is typically used in environments with a duty of care for children, adolescents, or vulnerable adults, such as in the education, health, and social care sectors.Why is safeguarding important?Safeguarding is crucial for defending vulnerable people from injury, abuse, and neglect. Failure to uphold your safeguarding obligations may cause someone�s suffering to continue. Effective safeguarding is essential to identify the warning signs of abuse and notify the appropriate authorities in time to assist victims.Safeguarding is essential in schools because the teaching staff has unique access to information about how kids grow, act, and interact with others. So, they are more likely to detect physical or psychological abuse. They can also use their special position to inform kids about the risks they face inside and outside the classroom and how to receive help.What is safeguarding policy?A company�s safeguarding strategy outlines how it intends to safeguard individuals� welfare in its care. It should outline the organisation�s plans for safeguarding children, adolescents, and vulnerable adults against danger and abuse inside and outside its facilities.Education organisations must have a written safeguarding policy statement as part of their duties. The organisation�s safeguarding policy should be outlined in this statement and its commitment to safeguarding and strategies for keeping persons under its care safe.You might want to refer to the official Ofsted safeguarding policy and inspectors� instructions as a resource. These materials set forth the criteria for evaluating safeguarding in early childhood education and skill-building settings across the nation.Safeguarding is essential in schools because the teaching staff has unique access to information about how kids grow, act, and interact with others. So, they are more likely to detect physical or psychological abuse. They can also use their special position to inform kids about the risks they face inside and outside the classroom and how to receive help.What are the six principles of safeguarding?Six safeguarding principles are outlined in The Care Act 2014, the primary safeguarding law that applies to NHS bodies. Although this statute solely pertains to NHS institutions, these concepts are applicable everywhere, especially in the field of education.PersonalisationThe assumption of person-led decisions and informed consent are all aspects of empowerment.PreventionIt is preferable to act now before harm is done.ProportionalityIs the ability to respond in a way that is both reasonable and least invasive, given the risk at hand.Protectionaid and advocacy for those who are most in need.PartnershipServices that work with their communities to find local solutions. Communities can help prevent, identify, and report neglect and abuse.AccountabilityAccountability and openness in providing safety measuresWhat is safeguarding children?Any educational organisation in charge of children must have a defined safeguarding procedure. A key component of the overall safeguarding process is child protection, which aims to protect children in your care from danger, abuse, or exploitation.These four categories describe child safety:Defending kids from maltreatment and cruelty.Avoiding harm to children�s growth or health.Ensuring that children receive safe and efficient care as they grow.Taking measures to ensure the best outcomes for all children and young people.Who is responsible for safeguarding children?Everyone who interacts with children has a duty to keep them safe. To do this, they must be aware of the warning signs of abuse and follow the procedures for reporting their concerns. Working Together to Safeguard Children, government guidance outlines how everyone must be responsible, communicative, and alert to safeguard children from harm.Local governments and social care teams are responsible for conducting investigations once concerns have been raised. The criteria for a wide range of authorities, organisations, and people who have a duty of care for children are outlined in Sections 10 and 11 of the Children Act of 2004.What is contextual safeguarding?Understanding and responding to children�s or young people�s experiences of damage outside their families is a key component of the contextual safeguarding method. It acknowledges young people�s connections with their neighbourhoods, educational institutions, and online networks that can result in abuse, injury, or exploitation.Individuals with safeguarding obligations, such as those working in the education sector, must recognise the need to act when appropriate because many parents have little to no influence on these connections outside the family home.What is the safeguarding of vulnerable adults?At times, it may be vital to protect adults and children. These people are referred to as �vulnerable adults.�A vulnerable adult is a person who is over 18 and who is either unable to care for oneself or who, due to their circumstances, is very susceptible to exploitation or damage. Some elements that may contribute to the classification of people as vulnerable include:physical or mental impairmentsAdvantage of povertyexperiencing traumaRacial, religious, or political exclusionrejection from their families or communitiesBut everything is covered in this list. No, employees must be aware of any person in their care who may be vulnerable to exploitation or abuse. They must make sure that any warning indications put forward by these people are seen and taken seriously.Safeguard trainingThis blog cannot cover every aspect of safeguarding because it is a vast subject. You must receive formal training to gain a solid understanding of safeguarding practice. When it comes to training, ESS offers a few different choices for individuals who are interested in learning more about protecting adults.The three-month Level 2 course, NCFE CACHE Understanding Safeguarding and Prevent, focuses on the fundamentals of Prevent Duty and safeguarding, particularly internet safety. This course offers the theoretical understanding required for protecting adults. This might involve employment in hospitals, adult education programmes, community centres, and jails.We heartily suggest the free online courses offered by the Education & Training Foundation for individuals seeking yearly updates to maintain their safeguarding knowledge and credentials. Depending on your job situation, we recommend their Safeguarding in FE and Training and Safeguarding & Safer Recruitment in FE courses.
Event Stewards Stewarding at Spectator Events
IntroductionThe requirement for security is great as the events sector begins to thrive again. Frequently, when someone works at an event or venue, everyone immediately thinks of the security guard position. The function of an event steward is sometimes disregarded, but if you�ve ever attended a football game, concert, festival, or other public events, you�ve probably come across stewards and seen the crucial work they do. But what does a steward do during a gathering? What exactly do they do? Ultimately, they are there to protect you and ensure that your experience is safe and pleasurable.�Event StewardsEvent Stewards are skilled team members who are crucial to the smooth operation of an event and the safety of all attendees. Stewards can perform a wide range of duties and have many distinct responsibilities. Stewarding at Spectator Events includes being a comforting, approachable presence; controlling who is allowed entry to the event; and taking on the duty of handling any anti-social behaviour. They can also conduct any necessary searches, although legally speaking, they must be qualified to do so, such as having a Level 2 Certificate in Spectator Safety. Additionally, to conduct searches, they must be employed directly by the stadium or arena where the event occurs. To ensure that an event proceeds as planned while ensuring the health and safety of the audience, event stewards play a crucial role in managing crowd management. They perform their duties at gatherings like sporting events, music festivals, protests, vehicle rallies, and important transportation hubs.Role of a StewardStewarding at Spectator Events means a great deal of responsibility for keeping an eye out for any dangers that might endanger everyone attending a particular event. As an event steward, you have many duties before, during, and after an event. One of them is to avoid the location being too crowded. This is crucial since crowded gatherings are frequently the source of harmful accidents, and experienced stewards can stop this from happening. To lead people out during an emergency evacuation, they must also be aware of the locations of the fire exits and other escape routes.Additionally, they can conduct ticket entry checks and traffic/pedestrian management (crossing points, pedestrian pathways) to guarantee that automobiles and pedestrians can enter and exit the area in a secure, orderly manner. To learn more about the role and responsibilities of an event steward, enrol in a stewarding course today. .banner-blue { border-radius: 10px; overflow: hidden; border: 2px solid #ccc; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.2); background-color: #fdf9ee; } .book-now { color: white; background-color: #DF3D52; border: none; padding: 15px 60px; border-radius: 5px; cursor: pointer; font-size: 20px; text-decoration: none; } .book-now:hover { /*text-decoration: none;*/ color: white; background-color: #c33f50; } Get your Legal SIA Licence by signing up for our SIA Security courses Security Courses Book Now Rated Excellent on major review sites Importance of StewardsThe presence of stewards has several advantages, and it is now necessary when planning events. Any type of event planning is never simple or easy; it can be stressful and involve complications. An event steward makes it possible to assign various jobs to qualified individuals who can subsequently complete them, making everything operate more smoothly. When planning an event, it is crucial to conduct a risk assessment since it enables you to look for any potential safety hazards. This is also an excellent technique to estimate the number of stewards required for this. The following is a helpful generalisation for selecting an adequate number of stewards: At least one steward is required for every ten attendees, per location, for groups of 1 to 100. The number of stewards needed will also be determined by the access and egress plan, which should be carefully established. You may require a certain number of stewards to check tickets and guide the public as they enter, but once the majority have arrived, their tasks may shift to other aspects of the event or getting the venue or site ready for everyone to safely leave.Another significant benefit of stewarding is that it makes the event feel safer, increasing attendees� enjoyment. They provide reassurance to attendees and security for the audience and the venue. Stewarding at spectator events should be done professionally as the stewards are frequently attendees� initial point of contact. It is crucial to act professionally so that people know they have a reliable person they can turn to if they need assistance with anything. Like with many events, there is always a chance that someone would go to cause trouble and not for the proper reasons. Any problem like this can be immediately resolved by a steward stepping in.Preparation for an EventPreparation is one of the most vital components, regardless of the event�s size. Event stewards should always be well-prepared because an equipment check is one of the most important tasks they perform in advance. They must make sure everything is there and functional. They need to know they can do their jobs well and to a high standard because of this. Radio and battery checks are also conducted to ensure that all communication is crystal-clear and simple to receive. Before the event, time is mostly employed to identify potential issues so they can be resolved as soon as possible.An event would struggle to go as smoothly without a steward. Therefore, there is no straightforward response to the question, �What is a steward�s duty at an event?� because they participate in various aspects of events. They facilitate smooth operations, provide guests with a safe environment, and aid in keeping people safe. They reassure workers and attendees that anything could be handled professionally if the worst were to happen.
How to Plan the Safety of the People at Spectator events?
IntroductionManaging a crowd and spectators can be demanding and time-consuming. A single incident can swiftly turn a crowd that initially appears calm into turmoil. Event stewards must ensure that they are ready to handle it. Because crowds can be so unpredictable, it needs to be carefully managed.This management is your responsibility as the event steward. Whether it�s a sporting event, music festival, or fair, event stewards have a legal responsibility to protect the audiences� safety as much as is reasonably practical. Depending on the scope of the event, event stewards may be able to assign some tasks related to crowd control to staff members or outside vendors. Still, as an event steward, you are ultimately responsible for maintaining public safety.Pre-Event PlanningEvent Organisers should consider crowd safety even before selecting a location for their event. In selecting the safest, most suitable venue for your event, take into account the following aspects in the early phases of planning:1. Expected TurnoutForecast the number of attendees you expect by considering variables like advance ticket sales, attendance at past events, and the proposed level of exposure. Always be prepared to host more guests than you had planned.2. Types of VisitorsWhen making planning choices, consider the expected demographics of the spectators. For instance, will the majority of the audience be older folks who could require specific accommodations?3. Transportation System Analyse the transportation system in the vicinity of the chosen venue to see if it can accommodate the anticipated number of spectators.4. Venue SuitabilityTake note of the venue�s maximum capacity and compare it to that number to see if your event can accommodate it. Are there adequate restrooms, first aid stations, entrances, and exits?5. Excess SpectatorsCreate a plan of action for handling a packed venue to prevent a catastrophe. Avoid being taken by surprise by an unanticipatedly large and possibly tense crowd.6. Previous InformationUtilise your understanding of prior occurrences by drawing lessons from them. Consider adding extra security for a gathering with a history of the disorder.Planning for an EventLong before the event itself, crowd and spectator safety should be managed. Event stewards can reduce the risks, the earlier they plan and identify them. Avoid planning just general event preparation and then thinking about crowd and spectator safety management; instead, plan them simultaneously.For branding your event, use an online poster maker to create a poster. Crafting captivating visuals becomes effortless, saving time and effort.Assess Event�s RiskOnce a location has been selected, thoroughly consider the objectives of the event and look for any potential risks that could endanger the staff, volunteers, attendees, or the general public.According to UK legislation, you must do a risk assessment to determine what safety measures you should take. You can obtain comprehensive instructions on conducting a risk assessment by enrolling in a stewarding course. .banner-blue { border-radius: 10px; overflow: hidden; border: 2px solid #ccc; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.2); background-color: #fdf9ee; } .book-now { color: white; background-color: #DF3D52; border: none; padding: 15px 60px; border-radius: 5px; cursor: pointer; font-size: 20px; text-decoration: none; } .book-now:hover { /*text-decoration: none;*/ color: white; background-color: #c33f50; } Get your Legal SIA Licence by signing up for our SIA Security courses Security Courses Book Now Rated Excellent on major review sites Crowd HazardsThere are too many crowd safety issues for event planners to cover here fully. Instead, use the following example of a crowd-specific risk to begin identifying potential risks for your event:Crashing into other individualsCrashing against stationary objects like barricadesSurging, swinging, or rushingTrampling underfootAggressive behaviour, especially amongst groups of opposing supportersRisky behaviour, such as scaling items, sprinting down steep inclines or hurling objectsIndividuals becoming entrapped, such as wheelchair users in a vast gatheringDrunk and disorderly bystandersVenue HazardsSlipping or tripping due to dim lighting or poorly maintained floorsmoving vehicles sharing a pedestrian�s pathstructural collapse, such as the falling of a fence or barrierobstructions that slow down trafficmalfunction of equipment, such as turnstiles; andPoorly designed lines impede crowd movement and cause crossflows as people cut through the crowd to get to other locations.Early Planning is Successful PlanningTo ensure an event�s success and become an event steward, enrol in a Spectator Safety course as soon as feasible. Our stewarding course is taught by experienced instructors who have a wealth of information and tools to teach you about monitoring spectators and dealing with crowd problems.
Crowd Safety During Emergencies
IntroductionAn essential factor to consider in any crowd safety plan is how to evacuate spectators from events safely and effectively. It will undoubtedly save lives and ensure everyone is kept as safe as possible in emergencies.Preparations During an EmergencyEvery venue will have emergency lights, signage, and preparations to send guests to the appropriate emergency exit. The distribution and crowding of people inside the arena, stadium, or green field site may make some of these exits inaccessible during catastrophes due to safety issues brought on by the situation itself, incident management of threats from outside the venue, or the emergency itself.The crowd�s density will determine people�s typical movement during such emergencies. Therefore, if everyone takes the same exit route or takes a route without being aware of the potential of convergence up ahead, they may wind up contributing to that convergence and reducing or slowing it to the point where the exit flow fails.Designing evacuation contingency plans that tell people how quickly and in which direction to move, based on real-time information that can adjust to the distribution of the population in any given circumstance, can be demonstrated to be a crucial aspect of the safety plan for these reasons.Crowd SafetyCrowd safety and the actions of event organisers, safety management teams, and emergency services have never been more in the spotlight thanks to the Hillsborough Inquest verdict that the 96 victims in 1989 were unlawfully killed, as well as the German Courts� decision that the 2010 Love Parade tragedy, in which 21 people died.Building design, crowd psychology, the competence of crowd safety planners and management to ensure this can be tasked safely, supported by appropriately trained and competent safety stewarding staff to implement the evacuation, will be the main factors that will contribute to the ability of people to evacuate an open space or building safely. .banner-blue { border-radius: 10px; overflow: hidden; border: 2px solid #ccc; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.2); background-color: #fdf9ee; } .book-now { color: white; background-color: #DF3D52; border: none; padding: 15px 60px; border-radius: 5px; cursor: pointer; font-size: 20px; text-decoration: none; } .book-now:hover { /*text-decoration: none;*/ color: white; background-color: #c33f50; } Get your Legal SIA Licence by signing up for our SIA Security courses Security Courses Book Now Rated Excellent on major review sites Crowd Behaviour TheoriesMany crowd behaviour theories were brought into crowd science over the 20th century. These include the well-known beliefs of Gustave Le Bon (1908), whose best-selling book �The Crowd�, written in 1895, was the first to identify perceived unfavourable characteristics of crowds. In the anonymity of the crowd, he claimed, civilised behaviour was replaced by primeval savagery, making mob behaviour unhealthy and aberrant. One of crowd science�s most influential early hypotheses was his (1908) �Group Mind Theory�. He said that when a person joins a group anonymously, they lose their sense of identity and accountability for their activities.These people believe that being in groups gives them a sense of strength and invincibility; this �contagion� causes people to degrade and turn to their animalistic impulses. Many of these crowd behaviour theories are no longer viable, and many are even viewed as dangerous to rely on (The Cabinet Office and Emergency Planning College, 2009).According to Anthony R. Mawson�s Social Attachment Model (Mawson AR 2005), being around familiar people and places has a calming effect and lowers the �flight� reaction, which can lead to stampeding and pushing. He claimed that social rules of behaviour do not fall apart that often.According to John Turner�s self-categorisation theory (Turner J 1987), catastrophes and emergencies can foster a sense of a shared identity or �we-ness�. As individuals flee a common threat, orderly, charitable, and cooperative behaviours would emerge.Crowd Behaviour ExamplesNumerous global catastrophes have occurred, and inquiry and analysis have revealed how this might be the case.2983 people died in the Twin Towers collapse in 2001. Later studies showed that even when people were aware of the threat, it could take minutes or even hours for them to leave a building. More than a general panic, this inaction contributed to the numerous fatalities. Before deciding to flee, people sought information to analyse (Fahy & Proulx, 2002). According to reports, several individuals left Tower 1 immediately, but many more continued with their �normal� activities. In 2001, individuals took about 45 minutes to leave the 90th floor.The July 7th London bombings were the subject of research, which revealed that people�s emotional responses to the explosion caused them to experience individual dread and suffering (Drury, Reicher, Scholfield, Langston, and Cocking 2007). However, during the evacuations, individuals behaved in a calm, orderly manner, and Londoners showed a sense of camaraderie by putting the needs of others above their own. No signs of fear could be seen, and despite the smoke-filled subway trains and platforms, there seemed to be a shared social identity, common aspirations, and solidarity to help others with the idea that others would do the same (Drury, 2016).Therefore, it would seem that people can retain social cohesion, resist panic, and show a high level of resilience when faced with difficulty and confusion.Spectator Safety CourseTo ensure an event�s success and how to prevent an emergency during an event, enrol in a Spectator Safety course.�Our stewarding course is taught by experienced instructors who have a wealth of information and tools to teach you about monitoring spectators and dealing with crowd problems.
Benefits of an SSSTS Training
Who is SSSTS training for?The SSSTS training is delivered online over two days and includes case studies and assessment activities. It is intended for all supervisors, team leaders, and anybody else in a supervisory capacity on a construction site.Delegates will learn about the most recent and current health and safety measures to protect personnel on construction and civil engineering sites, regardless of whether they have just started in a supervisory role or have a basic level of awareness.By the end of the course, students will have a thorough understanding of the difficulties in managing construction sites, as well as practical knowledge about safeguarding workers there, the most recent health and safety regulations, recognising hazards and how to reduce risk, and putting welfare and safety best practises into practice.What will I learn in the SSSTS course?To receive an SSSTS certificate, participants must attend both days of the course and pass a test that consists of multiple-choice and written questions. The following topics will be covered in the course:A supervisor's job description and dutiesThe UK's judicial systemmethods for risk assessment1974's Health and Safety at Work ActOccupational health, including developing a stronger health programme.Work at heights: evaluation and safety precautionsRegulations for Construction (Design and Management) from 2015Presentation abilitiesThe Reporting of Injuries, Diseases Regulations 2013SSSTS Refresher CourseAn SSSTS certificate will be given upon completion of the course and is valid for 5 years, provided a pass rate of 80% has been attained on the exam. To ensure that participants stay current with the most recent rules and legislation, you must take a one-day SSSTS refresher course every 5 years to renew your certificate. You must do this before your current certificate expires.Please visit our website to reserve a spot or for more information about this course.Why Should I Enrol in an SSSTS Course?You could benefit greatly from a Site Safety Supervisors Training Scheme (SSSTS) training. You will have the chance to obtain health and safety knowledge essential for a supervisor role by taking a course like this.1.� Short and Flexible CoursesThis type, of course, can be finished quite fast, making it the perfect choice for those with busy schedules. Additionally, flexible date options enable you to enrol in your course at the appropriate time. If an evening or weekend course makes more sense for you, you can choose that.Because they believe they don't have enough time, people frequently postpone this training. If you have previously engaged in this behaviour, you should consider when you would be able to enrol in an SSSTS course and how long it might take.2. Take a Class Anywhere, AnytimeYou have the option of enrolling in an online SSSTS course. You should be able to choose a course that suits you because these are provided all around the country. Additionally, there is a lot of flexibility regarding class timings because so many possibilities are available.It can be difficult to attend a course like this if you have to travel far. However, obstacles like these won't be there if you enrol in an SSSTS course. You'll be able to choose the ideal location close to you for your class and will be able to complete the course.3. Specialised CoursesThe SSSTS course is extremely specialised and created to give you the crucial knowledge you will need. The risks that may be present on the job site, toolbox lectures, and several health issues will all be covered.These courses are tailored exclusively for supervisors. You will be able to take a simplified course and pick up essential knowledge. Not only may finishing a course like this open up new employment prospects for you, but it can also offer you the information you need to perform better at work.4. Accredited CourseYou could be apprehensive about the calibre of the course you plan to enrol in. If you're concerned about this, you should know that the SSSTS training offered by Hurak is CITB-accredited. Since the courses are regulated, you can be sure they will all meet a particular level of quality.What are the benefits of the SSSTS course?In addition to learning new skills and advancing their current ones, participants will complete an industry-recognised qualification in the construction and civil engineering industries, ensuring they have the knowledge and skills necessary to manage a site safely and successfully. The advantages of enrolling in an online SSSTS course include:Industry-recognised qualification: Individuals who have earned their SSSTS certification may attest that they possess the necessary knowledge and abilities to promote health, safety, and welfare best practices on any construction or civil engineering site.Career Advancement - acquiring and advancing to a career in a supervisory function and upgrading to a more senior management role is made much easier with an SSSTS qualification. Indeed, certain employers may need an SSSTS certificate for managerial or higher positions.Builds knowledge and skills - ideal for those advancing into supervisory roles because an SSSTS course will increase their knowledge and range of abilities.Develops a better understanding - improves knowledge of the environmental, health, welfare, and safety regulations for operating a construction or civil engineering site in the UK.The CITB SSSTS training courses offered by Hurak can be taken online. As an alternative, we may design an SSSTS training programme that is unique to the needs of your business.
Roles and Responsibilities of a Safety Officer in Construction
Few other sectors have a variety of risk factors that are present in the construction industry. Workers must operate heavy machinery and vehicles, work at heights, conduct routine manual labour tasks, and deal with several hazards at work.While all businesses in the UK are required by law to ensure their workers� health and safety, managers, head contractors, and supervisors must take extra care. Employers can ensure that there is always a qualified person on-site with the knowledge, experience, and abilities required to manage health and safety issues by designating a health and safety officer.Safety officers are essential to maintaining the security of construction sites for workers and visitors. They seek to identify, manage, and reduce hazards that may arise on-site and ensure that all health and safety guidelines are being adhered to.The functions and responsibilities of health and safety officers will be discussed in more detail in this article. Additionally, we�ll examine current health and safety challenges and trends in the building sector and offer connections and other helpful resources for anyone interested in learning how to work as a health and safety officer in the construction industry.Roles of a Safety Officer in ConstructionEven though each workplace is unique, all construction sites have several functions and responsibilities for health and safety officers.These responsibilities include:Risk Assessments and Site InspectionsOn a construction site, the health and safety officer should conduct routine inspections and assessments to recognise and assess potential dangers. Then, they must seek to reduce these hazards and implement health and safety policies and practices that safeguard employees.Compliance MonitoringAccording to health and safety authorities, supervisors and employees must follow all applicable health and safety laws, rules, and procedures. Additionally, a health and safety officer needs to ensure that any supplies or equipment providers are according to the law.Accidents & Incident InvestigationThe health and safety officer must carry out a comprehensive investigation after every accident or near-miss incident. The inquiry aims to determine what caused the incident or accident and find evidence of equipment malfunctions, legal violations, or procedural mistakes. The health and safety officer may need to speak with witnesses and, if feasible, the victim or victims throughout the interview process.The officer should write a report after the investigation is finished and, if necessary, submit it to the appropriate authorities. Health and safety practices should be improved using the report�s data to prevent future mishaps or accidents.Record Keeping and ReportingKeeping thorough records of all risk assessments, site inspections, investigations, and compliance infractions is one of a safety officer�s key responsibilities on a construction site. The health and safety officer must generate and submit reports as necessary to authorities, including the recently established Building Safety Regulator (BSR).Organising Health & Safety TrainingThe health and safety officer should make arrangements for staff at all levels to acquire the necessary, approved health and safety training to safeguard workers� health and safety and maintain compliance with rules.Health and safety officers must ensure they keep up with all relevant standards and governmental laws due to the wide variety of jobs that are constantly done on any construction site. Health and safety officers should frequently take refresher training courses and ensure they are aware of any changes to pertinent legislation to maintain their expertise.Growing Concerns for Safety in ConstructionOne of the largest industries in the UK economy is construction. According to recent official statistics, 3.1 million workers, or 9% of the entire UK workforce, are employed in construction-related jobs. With a 6%+ contribution to the UK�s gross domestic product (GDP), the building sector is another important economic driver.The construction business is one of the most hazardous to work in and one of the largest. According to the most recent data from the Health and Safety Executive (HSE), there were just under 40 fatal injuries to construction employees, 61,000 non-fatal injuries, and 74,00 health issues related to their jobs.Common Hazards in ConstructionThe majority of fatal injuries occurred were as a result of height falls. Slips, trips, and falls were the main contributors to non-fatal injuries. Health and safety officials in the construction sector continue to prioritise ensuring that every worker has a solid and secure platform on which to carry out their tasks.The following are the most typical risks construction workers encounter:Falling from a great heightStumbling and slippingBeing hit by or pinned beneath moving itemsSyndrome of hand-arm vibrationAccidents involving materials and manual labourTunnelling trenchesDiseases caused by asbestosElectricity risksMaterials and fibres in the airSafety Trends in ConstructionHealth and safety officials increasingly rely on modern technology to reduce dangers in the construction sector and make job sites safer for employees. Wearable devices that track a worker�s blood pressure, pulse rate, and oxygen levels to prevent weariness or warn managers of mishaps are among the upcoming safety trends in the construction sector.Additionally, sensors built into wearable technology can alert employees when they are too close to machinery or in danger of falling. Geo-location tracking can give managers access to real-time information about specific employees� whereabouts and quicker accident response times.Artificial intelligence (AI) software can now give video-based real-time object recognition to identify potential threats on-site. Drones and automated robots can monitor construction sites and inform health and safety officials of any emerging dangers or incidents.On websites, e-Checklists are also growing in popularity. These make record-keeping easier, guarantee best practices are followed, and enable on-the-job training.Construction Safety Officer TrainingA degree is not required to work as a health and safety officer. To ensure you can do the work well, you will need experience, knowledge, and training. There are several methods to advance your skill set if you are a health and safety officer or are thinking about becoming one.Many climb the ladder to the position over time, developing the necessary abilities while working in the field. Training programmes like IOSH Safety, Health & Environment for Construction Site Managers or some of the more in-depth courses provided by the National Examination Board in Occupational Safety and Health (NEBOSH) can help to assist this further.There are also shorter courses available to aid in developing your understanding of the systematic risks and duties you will need to do as a health and safety course.Anyone working in construction should take the following online health and safety training courses that Hurak provides:Health and Safety Training for ManagersManual Handling Training CourseAsbestos Awareness TrainingFire Marshal Training
Differences Between Risk Control and Hazard Control
Identifying threats is one of the first tasks you must take when conducting a risk assessment. You can then evaluate the hazards after this. But how do hazards and risks differ from one another?Since the terms, risks and hazards are frequently used interchangeably, you are not alone in wondering what the distinction is.The two terms are synonymous. There is no risk if there is no hazard. But they differ, and comprehending those variations is crucial to risk analysis. Let�s examine the distinctions between hazards and risks and their relationships. What is a Hazard?Anything that has the potential to be harmful is a hazard. A risk can result in loss, harm, death, or other adverse outcomes.There are risks in almost every workplace, family, and setting. A material, piece of equipment, activity, working approach, or process could all be hazards. We are legally required to identify dangers at work when performing risk assessments.Let�s first define a risk before we examine the risk connected to this hazard. A forklift truck, for instance, could be a risk. Both individuals who use it and those who work close to it could be harmed by it.What is a Risk?A risk is a possibility that the hazard will cause harm to someone. A risk evaluates the likelihood and severity of a potential injury.The risk is evaluated based on the possibility of harm occurring and the severity of the injury. When these two criteria are taken into consideration, a risk may be large or low.The likelihood and severity are calculated to determine the risk level. When looking at how a risk assessment was conducted, you will frequently encounter a risk matrix, such as this:The degree of harm could be anything from minor, short-term damage to serious, permanently disabling injuries or death. The risk of harm from the danger can be anywhere between very rare to quite likely.Implementing Risk ControlGenerally speaking, there are six risk-controlling actions you can take:EliminateSubstituteIsolateEngineering controlsAdministrative controlsPersonal protective equipment (PPE)EliminationThe eradication of a hazard is not always possible, even though it will always be the best course of action. The risk of someone being exposed to a hazard is automatically eliminated if hazards can be removed entirely. An illustration of this would be the risk of lead poisoning that existed in the past for people working at gas stations and other occupations that required frequent contact with petroleum. Two initiatives�the self-service gas pump and the removal of lead from petroleum�have eliminated that risk.Substitution of the Hazard with Lesser RiskWhile replacing the risk may not eliminate all of the dangers connected to a given process or activity and may even introduce new risks, doing so should nevertheless lessen the overall risk of injury or adverse health impacts. For instance, painting a house�s gable end would need you to work at the top of a ladder while someone else supported the ladder below you. Scaffolding might be used in place of a ladder. While the sturdier platform wouldn�t remove the risk of falling, it would make working conditions much safer.Isolation of the HazardWhen isolating a hazard, this can be done by limiting access to plant and/or equipment, or in the case of poisonous or explosive materials, by putting them away in a safe container and doing so under stringent supervision. While installing noisy equipment in an inaccessible enclosure or room isolates the hazard from people, a fume cabinet can isolate the risk from people nearby if you�re utilising specific chemicals (s). The appropriate and secure storing of fireworks during a display is a prime illustration of this.Engineering ControlsThe term �engineering� here can be slightly misleading as we are not discussing mechanical or electrical engineering. What is meant by the use of the word �engineering� is as an alternative to the words� devising�, �designing� or �redesigning� a process to place a barrier between the person(s) and a hazard or removing the hazard entirely from the person�s vicinity, such as machinery guarding, proximity guarding, extraction systems or removing the operator to a remote location away from the hazard.Administrative ControlsWhen discussing administrative controls, we refer to how things are carried out and how individuals collaborate to finish a task. To reduce any risk of injury and/or adverse health impacts, administrative controls include implementing standard operating procedures, safe work practices, and/or providing adequate and sufficient training, teaching, or information (s).Personal Protective EquipmentGloves, glasses, earmuffs, aprons, safety shoes, and dust masks are a few examples of personal protection equipment (PPE), all intended to reduce exposure to specific risks. PPE is typically employed in conjunction with one or more of the other control measures discussed above and is typically considered the last line of defence. It is well known that single-use dust masks cannot consistently produce and maintain an effective seal around the nose and mouth, which can cause a harmful false sense of security and, as a result, an increased risk. This is an example of the ineffectiveness of this control strategy. When this is the case, a dust extraction system with fitting air respirators may be preferred, especially if utilising chemicals containing isocyanate poses a risk of severe health impacts even at extremely low exposure levels.Difference Between Hazard and RiskA risk can take many forms because danger may be harmful in various ways. For our example of a hazard, we employed a forklift. The operation of a forklift truck has the potential to cause harm in several ways, including:Contact with pedestriansOverturningContact with other vehicles or machinesDropping the loadUnauthorised useBy putting management practises in place, the risk can be reduced. Keep in mind that likelihood and severity determine the danger. To ensure that even if an employee was exposed, the amount would be so little that the consequences would be minimal, the severity may be decreased, for instance, by only permitting a very small amount of the material to be obtained. By establishing ventilation and exclusion zones, mandating the use of personal respiratory equipment, and enforcing these measures, the chance of dangerous exposure could also be decreased.To ensure that something with the potential to cause harm (the hazard) cannot actually cause harm or that the harm is minimised, a combination of control measures can drastically lower the risk level (the risk). A work may frequently be labelled as high risk when it is actually high hazard. A task or activity need not be high risk just because it entails risks. Hazardous work can be made safe if each risk is managed so that the activity may be completed without incident. The risk is still present, but it is under control.At Hurak, we specialise in offering online courses that cover a wide range of workplace health and safety topics. Feel free to contact us if you have any questions or want more information on any of these.