Safe Lifting Guidelines and Techniques
Manual handling is one of the main factors contributing to occupational accidents and illness in the UK. It was the second-leading cause of work-related ill health, accounting for 30% of instances, and caused 8.9 million lost working days. There were 480,000 total cases, including long-standing ones, of work-related musculoskeletal illnesses in 2019�20, including 152,000 new cases (one of the most frequent repercussions of improper manual handling techniques).Understanding what influences a person�s capacity for safe task performance is essential. These figures show that the effects of inadequate manual handling are too widespread and can seriously impact people�s health. Therefore, you must comprehend proper manual handling, weight restrictions, and handling practices to guard against bodily harm.Businesses in the UK are required by law to safeguard the health and safety of their employees. Therefore, employing safe manual handling practices and abiding by weight restrictions will guarantee that your company complies with the requirements of the pertinent UK legislation and guidance guidelines.Your training in the principles and techniques of safe manual handling will be sufficient thanks to our manual handling training. A variety of our health and safety courses are also available here.This article will comprehensively review the manual handling weight restrictions and recommendations provided by the Health and Safety Executive and outlined in the law (HSE).Manual Handling Weight Limits for LiftingThere are no set restrictions on how much manual handling and lifting can be done at work because it relies on many variables, including the nature of the task and the worker�s unique skills.Employers are required to take adequate action to minimise the risk of injury caused to employees by manual handling activities to the lowest level reasonably possible under the Manual Handling Operations Regulations (MHOR) 1992. Different weight restrictions and techniques will be needed to achieve this depending on the sort of manual handling activity.The hierarchy of measures outlined by the MHOR states that production lines and other forms of automation should always be used before manual handling procedures are avoided. If this is not feasible, the responsibility holder must evaluate the hazards presented by manual handling activities at work and decide how to control them. Perform a risk analysis of the manual handling operations as part of this. Then, to lessen the dangers to people�s health and safety, they must implement the required safety measures.During the risk assessment for manual handling, duty holders must take into account the following 4 important factors:Task � For instance, how much time it will take, how often it will be performed, whether it is repetitive, whether it offers enough time for rest or recovery, and whether it requires twisting, stooping, or reaching upwards. All of these factors may influence how demanding the work is.Individual � Everyone has different physical abilities and limitations depending on various factors, such as age or physical make-up. New or pregnant mothers, persons with impairments, and people returning to work after an injury may all be particularly at risk. Since no two persons are similar, employers must tailor the work and safety procedures to each employee�s talents to ensure that everyone is equally protected from health and safety concerns.Load � It can be challenging for a person to secure a firm grip and maintain control of the weight if it is too large or bulky, challenging to hold, and has a fluctuating centre of gravity (for example, if it contains liquid). The body might be put under extra stress as a result of this.Environment � The task will be more challenging and consequently more physically demanding to do, for instance, if there isn�t enough room in the area for the person managing the weight to move comfortably, if the floor is uneven or has different levels, or if the person can�t see clearly. High workloads, short deadlines, and a lack of control over the task and working methods can all cause psychological reactions that increase the risk for people.TILE, or occasionally LITE, is the name of these four elements. They are crucial when determining safe lifting techniques and weight restrictions for particular manual handling activities. The MHOR and related HSE manual handling advice publications recommend weight restrictions for lifting, carrying, pushing, pulling, and team actions in light of these variables and other guidance.This information must be considered in the context of the particular manual handling activities at your place of employment because there is no one size fits all solution. However, the guidelines are helpful resources for the individual in charge of establishing the essential manual handling restrictions.Safe Lifting WeightsAlthough the MHOR does not specify weight restrictions, the HSE provides some lifting and lowering best practices. Although the HSE claims they employ �broad assumptions or generalisations where, if met, the risk of injury is deemed to be low,� they should not be referred to as �safe limits� because this depends on all the elements involved, as was noted above. Work performed outside these advised ranges is probably more likely to result in an injury.Based on information from the general population, the HSE�s lifting and lowering risk filter specifies overall safe lifting capacities for men and women as follows:This demonstrates that the average man�s safe upper limit for manually handling a load is 25 kg, and the average woman�s is 16 kg.It�s important to remember that this only applies if the person carrying the load can hold it close to their body and at knuckle height. It is no longer safe to manage a 25 kg burden if the load moves across the zones, such as when you lift a box from knuckle height to a shelf at shoulder height. The lower weight must be used if the load is anticipated to move across zones while the task is being completed.The fact that these risk filters only apply to manual handling operations where the load:Simple to hold in both hands.Is working under appropriate conditions.Can be supported using secure lifting and handling techniques with the worker�s body in a stable position.Enables holding against the body.It is not carried more than 10 metres without stopping.Does not impede the person�s ability to walk normally.Does not interfere with the carrier�s vision.Requires neither much below knuckle height nor much over elbow height for the carrier�s hands.without having to be hoisted first, it can be safely put upon the shoulder The filter values can be used up to 20 metres in this circumstance.Certain elements will necessitate a complete evaluation of manual handling activities and possibly differing weight limitations and handling techniques.For instance, if the weights are greater than those in the risk mentioned above, filter if the handling requires twisting, if there is more than one lift every two minutes, if a team is involved, if the weights vary significantly, if the load is challenging to grasp, and if the person is at an elevated risk (e.g. those with disabilities or a recent injury).Safe Lifting Weights and TechniquesDuty holders can assess the most frequent risk elements in lifting and lowering, carrying, and team handling tasks using the HSE Manual Handling Assessment Charts (the MAC tool). It uses a number of visuals and infographics to help illustrate how different elements enhance the amount of risk and how each risk range will demand careful thought on how to preserve people�s health.For instance, determining the weight and frequency of the loads involved in lifting is the first topic covered in this tutorial. It demonstrates how the level of risk rises as lift rate and weight increase.As opposed to lower bands, the risk has increased as tasks move into a new colour band, and more safety controls are likely to be needed.The MAC tool addresses the following manual handling risk areas:Lifting Operations:Load weight/frequency.Vertical lift zones.Postural constraints.Hand distance from the lower back.Floor surface.Torso twisting and sideways bending.Grip on the load.Environmental factors.Carrying Operations:Load weight/frequency.Asymmetrical torso or load.Floor surface.Hand distance from the lower back.Obstacles on the route.Carry distance.Postural constraints.Grip on the load.Environmental factors.Team Handling Operations:�Load weight.Vertical lift zones.Hand distance from the lower back.Grip on the load.Torso twisting and sideways bending.Carry distance.Postural constraints.Communication, coordination, and control.Floor surface.Obstacles on the route.Environmental factors.It will be crucial for your employer to take into account the advice in the MAC tool and the risk zones specified for each location if any of these relate to your line of work
How to Avoid Manual Handling Risks?
Manual handling refers to moving or supporting a burden with the hands or using physical force. It entails moving, carrying, pushing, tugging, and lifting a load. An object that can be moved, such as a box or package, a person or an animal, or something that is being pushed or dragged, such as a roll cage or pallet truck, is referred to as a load.What are manual handling injuries?Injuries caused by manual handling are a subset of musculoskeletal illnesses (MSDs). Musculoskeletal disorders are illnesses and injuries that can hurt the back, joints, and limbs.Where can manual handling risks be found?There are risks associated with manual handling in all workplaces, including farms, construction sites, offices, warehouses, hospitals, and when making deliveries. Risk factors for developing MSDs include strenuous physical labour, repetitive handling, uncomfortable postures, and previous or current injuries or conditions. Additionally, a non-job-related injury, such as one sustained during sports, may worsen due to employment.While you can prevent some MSDs by taking the steps outlined here, you cannot prevent all of them. Encourage employees to notify you or their worker representative of any symptoms as soon as possible, before they worsen, so you can take precautions to lower the risk.Consider seeking guidance from an occupational health practitioner regarding a worker�s fitness for work and any limits or changes to their employment that may be necessary if your employees have manifested symptoms, especially if they work in a fitness studio.What are manual handling regulations?You must evaluate your employees� health and safety risks under the Management of Health and Safety at Work Regulations.You should also abide by the Manual Handling Operations Regulations, which identify dangerous manual handling of loads (the Manual Handling Regulations).According to the Manual Handling Regulations, there is a clear hierarchy of steps you must take to reduce the hazards associated with hazardous manual handling.Avoid dangerous manual handling tasks �as far as reasonably feasible�;Evaluate the risk of worker injury from any dangerous manual handling that cannot be avoided;Lower the risk of worker injury from hazardous manual handling to the least reasonably practical level.Workers also have duties. They shouldEnsure that their activities do not endanger others by adhering to the systems of work established for their health and safety,Use any equipment provided for that purpose properly,Cooperate with the employer on health and safety issues, inform them about changes, and identify hazardous handling activities.Consult with and involve the staff. Your employees and their representatives are familiar with the dangers associated with the workplace and frequently provide helpful suggestions for reducing them.How to access manual handling?When performing potentially dangerous manual handling tasks that cannot be avoided, evaluate the risk of injury.You should take into account the assignment, the workload, the setting, and each person�s capacity, for instance:the frequency of the taskhow far the load is lifted, lowered or carriedthe frequency of the taskpoor floor surfacespoor lighting, extremes of temperatureworkers� strength, fitness and underlying medical conditionsthe nature of the loadthe weight of the loadthe postures adoptedHow to avoid hazardous manual handling?You can stay away from risky manual handling tasks by:Automating or mechanising the process, restructuring the operation to prevent transferring the loadDesigning a plant or work system is the optimal moment to decide about mechanisation or automation.Design a process� arrangement to minimise the mobility of materials.To lessen the risk of damage, think about adding things like a conveyor, chute, pallet truck, electric or manual hoist, or lift truck. Manual handling dangers can also be decreased or eliminated with mechanical aids.Manual Handling TrainingSafety in manual handling can be achieved through information and training. The handling activities should always be designed with safety as the primary consideration. However, it cannot defeat a problem by itself. If the activity cannot be avoided and you have already taken precautions to lessen the risk, manual handling training is crucial to further manage the risk of damage.inadequate mechanical assistance,poorly designed activities,inappropriate weights, andan unsatisfactory working environment.Hurak�s manual handling training encompasses information relevant to the position, such as:Factors that increase the risk of injury from manual labour;Systems of work that is appropriate for the individual�s tasks and environment;Usage of tools and machineryHow to handle objects safely, including appropriate handling practices;Practical task that is appropriate for the position to enable the trainer to spot and correct anything the trainee is performing unsafely;Ways to report symptoms and injuries.
Everything to Know About CITB
AnalysisWhat is CITB?The Construction Industry Training Board is known by its initials �CITB�. They are responsible for enhancing industry training and assisting skill development to boost the UK�s construction sector. Despite its strong collaboration with the government and the education department, they remain an independent organisation.To achieve this goal, CITB has developed some essential courses for various jobs in the construction sector. The majority of construction employees benefit greatly from�CITB courses, particularly when it comes to workplace health and safety.Is CITB the same as CSCS?Construction Skills Certification Scheme, or CSCS, is the organisation that grants employees the certification they need to demonstrate their employment readiness. The most popular way to accomplish this is by giving employees CSCS cards. Although it is not required by law, most construction employees must possess the appropriate CSCS card for their job function to enter the site.CITB and CSCS are two distinct organisations, sharing several well-known names in construction health and safety training. However, the two organisations are connected; for instance, candidates for a Labourer�s Green Card must have successfully completed the CITB Health and Safety Awareness course and the CITB Health, Safety & Environment (HS&E) test within the previous two years. Any CSCS card application must include the HS&E test. Later, we shall discuss this test in further depth.Check out last week�s blog, �What is CSCS?� for a detailed explanation of the various card kinds and the eligibility requirements.�How do I get a CITB card?Due to the affiliation between the two organisations, CSCS cards may occasionally be referred to as �CITB cards.� Do not be concerned; they are the same.Applicants must have fulfilled the appropriate requirements to obtain a CSCS card. These often include the individual finishing an applicable NVQ. This is not true for CSCS red cards, which are given to learners who have experience but have not finished their certifications. As a temporary remedy, red cards are given out to staff on-site so they can finish their training.Workers must have passed the�CITB Health, Safety & Environment test�within the last two years to receive a CSCS card of any colour. Later, we shall discuss this test in further depth.�Visit the CSCS page�on our website for a more thorough overview of the requirements accepted for CSCS cards.�How long does a CITB card last?The length of time a red card is valid varies based on the issued type. Most CSCS cards have a 5-year expiration date. The card must be renewed when this period has ended.Please remember that it cannot be renewed after a red card has expired. Once their training is complete, employees must apply for a change of colour card.What is the CITB test?Any construction worker�s training must include the CITB Health, Safety & Environment (HS&E) test to guarantee their safety while working on the job site. When applying for any CSCS card, it is a requirement that you have passed this test within the last two years.A series of questions about their fundamental construction health and safety standards make up the test. Each exam allows applicants 45 minutes to respond to 50 questions that gauge their knowledge of environmental, health, and safety issues.Operatives, Specialists, and Managers & Professionals tests are the three categories of CITB assessments. All three examinations cover much of the same material; however, the tougher tests will have more challenging questions pertinent to the position. Candidates may request questions on specialised tests relevant to the position they are applying for. For instance, questions tailored specifically to the field of demolition workers are possible.By going to the CITB website, you can register for your test online. The tests are $21 each.What to bring for a CITB test?Before taking the test, candidates must present a legitimate form of identification with their photo and signature. Passports and licences that are no older than six months will be accepted.The student will need to present two kinds of alternative identification if they don�t have either of these forms of identity. There are two categories of acceptable forms of identification: A and B.�ABNon-UK Driving LicenceMarkWork ID CardDebit CardStudent ID CardPaper Driving LicencePassport without signatureNational Insurance Card / HMRC LetterCitizen�s CardCheque Guarantee CardEU Country ID CardBank StatementCITB Scheme CardInland Revenue CardTrade Union CardUK Travel DocumentBritish Armed Forces CardB79 Notification of Discharge LetterYoung Scots CardBuilding Society PassbookProof of Age Card�The candidate must present both category A and B forms of identification if they cannot present a current passport or photo driver�s licence. They won�t be able to take their exam and get a refund if they don�t comply. For a complete explanation of their ID requirements, visit the CITB website. div.wpforms-container-full .wpforms-form label.wpforms-error{ display: none; } /* The Modal (background) */ .ebook-modal { display: none; /* Hidden by default */ position: fixed; /* Stay in place */ z-index: 1; /* Sit on top */ padding-top: 100px; /* Location of the box */ left: 0; top: 0; width: 100%; /* Full width */ height: 100%; /* Full height */ overflow: auto; /* Enable scroll if needed */ background-color: rgb(0,0,0); /* Fallback color */ background-color: rgba(0,0,0,0.4); /* Black w/ opacity */ } div.wpforms-container-full .wpforms-form input[type=submit], div.wpforms-container-full .wpforms-form button[type=submit], div.wpforms-container-full .wpforms-form .wpforms-page-button { border: 1px solid #ddd; font-size: 1em; font-family: inherit; padding: 9px 31px; background: #0f7c90; color: white; /* display: flex; */ /* width: 100%; */ position: absolute; bottom: -418px; right: -150px; /* margin: auto; */ justify-content: center; align-items: center; } /* Modal Content */ .ebook-modal-content { display: flex; flex-direction: column; justify-content: space-between; align-items: baseline; background-color: #fefefe; margin: auto; padding: 31px; border: 1px solid #888; width: 30%; position: relative; } /* The Close Button */ .ebookModal-close { color: #aaaaaa; float: right; font-size: 20px; font-weight: bold; cursor: pointer; position: absolute; right: 21px; top: 10px; } .ebookModal-close:hover, .ebookModal-close:focus { color: #000; text-decoration: none; cursor: pointer; } div.wpforms-container-full { margin: 0px auto 20px;!important } .ebookModal-header{ color:#0f7c90;font-size:30px;margin:0 30px } @media (max-width:576.888px){ .ebook-modal-content { width: 90%; } } @media (max-width:768.888px){ .ebook-modal-content { width: 70%; } .ebookModal-header{ font-size:20px!important; margin:0 } } @media (min-width:768.888px){ .ebook-modal-content { width: 50%; } } @media (max-width:1024.888px){ div.wpforms-container-full .wpforms-form input[type=submit], div.wpforms-container-full .wpforms-form button[type=submit], div.wpforms-container-full .wpforms-form .wpforms-page-button { width: 100%; position: static; } .ebookModal-header{ margin:0; font-size: 25px; } } @media (max-width:1280.888px){ .ebookModal-header{ margin:0; font-size: 30px; } } @media (min-width:992px){ .wpforms-submit-spinner{ max-width: 100%!important; position: absolute!important; top:250px!important; left:150px!important; transform: translate(-50%,-50%)!important; } @media (min-width:1280.888px){ div.wpforms-container-full .wpforms-form input[type=submit], div.wpforms-container-full .wpforms-form button[type=submit], div.wpforms-container-full .wpforms-form .wpforms-page-button { border: 1px solid #ddd; font-size: 1em; font-family: inherit; padding: 9px 31px; background: #0f7c90; color: white; /* display: flex; */ /* width: 100%; */ position: absolute; bottom: -380px; right: -150px; /* margin: auto; */ justify-content: center; align-items: center; } } Download our CITB Operatives and Specialists Test Prep Book for free! × [wpforms id="14869" title="false"] #myImg{ cursor: pointer; } Site Safety Plus CoursesHurak offers a variety of CITB courses from the Site Safety Plus catalogue. Specifically for the building, civil engineering, and related industries, Site Safety Plus courses have been developed. The construction industry�s training programmes are offered in a variety of disciplines and career levels:Site Supervision Safety Training Scheme (SSSTS)�� This course examines health and safety, employee welfare, and expanding environmental concerns within the construction industry in addition to covering the legal obligations that all supervisors need to be aware of when it comes to managing a construction site.Site Management Safety Training Scheme (SMSTS)���The CITB SMSTS course is designed for managers working in the construction industry and takes a comprehensive look at health and safety regulations and documentation. Participants will leave this 5-day training with a practical understanding of how to correctly document health and safety requirements.Site Management Safety Training Scheme � Refresher (SMSTS-R)�� The CITB SMSTS Refresher Course enables delegates to renew their initial qualification when it is about to expire by going over all of the material that was covered in the initial course. To make sure that all delegates are completely aware of their responsibilities, any recently enacted amendments to health and safety regulations will be covered.Site Supervision Safety Training Scheme � Refresher (SSSTS-R)���This course will update your knowledge of health and safety issues and provide you with insight into recent legislative developments and how they may affect the day-to-day operations of your company.
Guide to Use Fire Extinguishers
Every workplace must have fire safety measures in place. The proper procedures and training can mean the difference between life and death. Over three years have passed since the Grenfell Tower catastrophe resulted in at least 72 fatalities. As a result of this tragedy, more building owners and businesses are reviewing their fire safety procedures.Fire extinguishers are among the most essential pieces of apparatus in the event of a fire. Extinguishers can help stop a fire from spreading farther and lessen the harm and damage it can do. Staff members must understand how, when, and where to utilise extinguishers for them to be helpful, though. and the various training alternatives, including Wikipedia page creation services, are covered in today's blog.Why do we need different types of fire extinguishers?We require several fire extinguishers to tackle the various causes of fire. Before selecting an extinguisher, evaluating the �kind� of fire is crucial because utilising the incorrect class could worsen the issue. For instance, employing water-based extinguishers on electrical fires may further damage the electronics, resulting in risky reactions like fire spread or even explosions.Each fire extinguisher serves a specific purpose and is usually employed to put out fires involving particular materials. When choosing fire extinguishers for your office, the environment and the sorts of fires that are most likely to occur, must be taken into account. For instance, if you live in a neighbourhood with plenty of automobiles, you should consider extinguishers that can put out fires caused by combustible liquids like oil or gasoline.Six classes of fireThe various fire classes can be divided into six distinct groupings, each of which responds differently to the various extinguisher types:Class A Ordinary combustiblesThese are flames caused by solid substances like wood, paper, and plastic. The majority of extinguishers work on this type of fire.Class B Flammable liquidsThis group includes fires caused by oil, grease, and gasoline.Class C Flammable gasesFlammable gases like methane or propane are particularly harmful because the fire and the gas can undergo strong chemical reactions.Class D Flammable metalsChemical reactions can result in flammable metals like titanium and magnesium, just like in Class C fires.Class E Electronic equipmentAny fire from electronic equipment falls under this category. Water-based extinguishers are not appropriate here because electricity and water are very reactive.Class F Cooking oilsThese most frequently happen when utilising deep fat fryers or chip pans in the kitchen.Types of fire extinguishersThere are five primary extinguisher kinds, and each one employs a different material to combat a particular class of fire:1. FoamIt is suitable for Class A and B fires. These extinguishers� foam creates a �seal� around flammable liquids to stop them from spreading further.2. WaterThe extinguisher that is used most frequently. Used only in Class A fires involving common combustibles.3. Carbon DioxideSuitable for Class A, B, and fires involving electrical equipment. To stop the fire from spreading, CO2 works against the oxygen fueling it.4. Dry powderThis extinguisher can be applied to all fires besides those involving cooking oils. The characteristics of the dry powder prevent chemical reactions from occurring when fighting metal and dangerous gas fires.5. Wet ChemicalsUsually used in kitchens for Class F fires, but also effective for Class A flames.ABC fire extinguisherABC fire extinguishers are usually used to refer to Class C or dry-powder extinguishers. ABC fire extinguishers are multi-purpose and can be used on class A, B, and C fires, as the name implies. Many organisations find that having multi-purpose extinguishers is helpful since it reduces the quantity of equipment they need to purchase and keep.Why do I need fire extinguisher training?According to the Regulatory Reform (Fire Safety) Order 2005, it is a legal necessity for workplaces to have suitable safeguards in place to cope with the risk of fire. According to this important government legislation, employers must undertake comprehensive fire risk reduction measures. Systems must be in place in workplaces to control a fire outbreak.All employees must get �adequate safety training at the time they are first employed,� according to Section 21 of the Fire Safety Act, which explicitly refers to the training that must be conducted at every business. A further requirement of the act is that training �must include suitable and sufficient instruction and training on the appropriate precautions and actions to be taken by the employee to safeguard�relevant persons on the premise.�Extinguishers are a helpful tool for fighting a fire, but they can do more harm than good if used improperly. As part of your workplace�s fire safety procedures, it�s essential to ensure that the designated staff members have received training on properly utilising extinguishers.Fire Marshal/ WardenLegally, an employer must make sure that someone is constantly monitoring fire safety in the workplace. Our Fire Marshal/Warden course is the best option for obtaining the education and credentials required to perform this function.Many of the themes from our extinguisher and safety awareness classes are included in our course, along with topics unique to the job of a fire warden, like:identifying workplace fire dangers and conducting fire risk assessmentsThe fundamentals of efficient safety exercises and fire evacuationsensuring that smoke and fire alarms are functionalconducting warden inspectionsWe are excited to offer this course through online video conference training to assist throughout the Coronavirus. With Zoom, a video conferencing programme, you can participate in these classes and receive all the same knowledge and credentials as before while training at home. Learn more about this novel approach to exercise here.Getting staff members up to speed on the ins and outs of using fire extinguishers is easy with the help of our fire marshal/warden course. Successful students will learn about the various extinguisher types, when to use them, and how to conduct inspections to ensure the equipment is fit.Both academic learning and practical, hands-on extinguisher experience are included in this half-day session. This includes a �live fire� scenario at the end of the training that serves as the final evaluation. Here, participants will be required to put everything they�ve learned in training into practice by fighting a real fire.Learn more about Wikipedia page creation�Wikipedia page creation services efficiently offered by Wiki Page Writers, comprise a skilled team of encyclopedists, writers, editors, and researchers dedicated to helping individuals and brands safeguard their legacy on the world's largest and most frequently visited online encyclopedia, Wikipedia.
Fire Safety Tips For The Workplace
Numerous risks can harm an organisation�s personnel, their performance, and the company�s viability. Organisations are under pressure to maintain workplace health and safety despite natural disasters, power outages, and fires. Organisations usually do a decent job of adhering to fire safety regulations, but it�s always a good idea to be aware of the safeguards.Workplace fires can be disastrous regardless of the firm�s size, standing, or location. In England and Wales, there are roughly 25,000 fires per year, according to government statistics. A fire can permanently damage many businesses; thus, prevention is essential.Check out these suggestions we�ve put up for your fire safety to maintain your workplace secure and safe. They cover the crucial areas you need to concentrate on to either prevent fire or facilitate a quick, safe evacuation should one occur.Install fire detection systemsAll businesses are required by law to do this. While some alarms may go off automatically, show staff members how to use them if they�re manual.Prepare an emergency planThis should include what staff members must do during a fire, the warning systems, and evacuation protocols.Designate a fire wardenA person or persons should oversee fire safety at your place of business and help with evacuations in the case of a fire. They ought to receive instruction on fire safety awareness, the nature of their job, and the proper use of firefighting tools. They are referred to as fire wardens.Staff employees known as �fire wardens� are in charge of putting out fires and upholding fire safety protocols in order to protect workplace health and safety. They are in charge of organising the evacuation process in the event of a fire and making sure nobody is still within the structure. In your business, there should be at least one fire warden.After completing Our fire warden training, fire wardens will be fully aware of how to maintain fire safety. They�ll know how to keep clients and staff safe in the event of a fire.Know your fire extinguishersEnsure that everyone in charge of fire safety knows the many fire extinguishers available. You should have the ones best suited to the type of fire that poses a risk to your company, such as workplace carbon dioxide extinguishers. Make sure there are enough, and they are stored in the proper locations.Install emergency lightingAll emergency exits and escape routes need to be well-lit. Include lighting at all entrances, along hallways, where there is a change in floor level or direction, at stairwells, and adjacent to fire extinguishers and alarms. Make sure to test your emergency lighting frequently.Check fire safety signsAre they understandable and accessible to people with vision impairment or those whose first language is not English? Every fire safety sign should have images so everyone can quickly comprehend it. To be noticed in an emergency, even if the power goes out, ensure they are adequately lit.Train your employees in fire safetyYour staff should receive training that explains how to sound the alarm, who the fire wardens are, where the escape routes are, how to evacuate, and where the assembly place is. Without this information, fire emergencies run the risk of getting worse.It is useless if your team is unaware of your comprehensive fire safety plan and current equipment. Your staff must be aware of the emergency procedures for fire safety measures to be successful. They need instruction on how to sound the alarm and leave a building in case of fire. In order to know more about workplace fire safety, read Our blog, �Fire Safety at Your Workplace�.Fire wardens have a significant role. They are in charge of coordinating evacuations, so they must be capable of carrying out their duties as required. Everyone can learn what to do with regular fire drills.Hold regular fire drillsAt the very least once a year, run through your fire evacuation plans with your staff to ensure everyone knows where to go and what to do. Conduct a fire exercise sooner if any significant changes are made to the evacuation routes.Promote good housekeepingTo minimise damage:Avoid overloading plug outlets and store electrical equipment safely.Never keep flammable items, such as cardboard cartons, for longer than is required.Regularly take them out and recycle them.Thorough Risk AssessmentBefore implementing any safety measures, you must be aware of all the risks in your building and the hazards. A detailed risk analysis is required. Risk assessments are legally required for companies with more than five employees, but they are essential for any company to understand the fire dangers in your structure and how to manage them.Risk analyses should identify potential fire dangers, evaluate the level of risk, and then determine how to reduce that risk. It�s crucial to regularly analyse and adjust your risk assessments to guarantee long-term fire safety.Fire Safety EquipmentsThe fire risk can be decreased by having the necessary fire safety equipment. Safety gear can warn individuals about the threat, assist them in escaping, and even put out the fire before it spreads.Aside from smoke vents, fire extinguishers, and sprinkler systems, your business should have smoke alarms, emergency lighting, and all the items mentioned above.Once the appropriate fire safety equipment is installed, it is crucial to maintain it to function in an emergency routinely. Any fire prevention system must include fire extinguishers, which must be checked at least once a year to ensure that they are in excellent working order. Smoke vents must be routinely cleaned and serviced in accordance with British Standard if you have them. Sprinkler systems are reliable for preventing fires but must also undergo routine testing to remain in top condition.
Fire Safety at Your Workplace
Managing fire risks and dangers is a constant concern, no matter what field, area, or setting you to work in. To protect employees and keep organisations in compliance with the law, it is essential to have the proper fire safety protocols and training.In this blog post, we�ll examine what fire safety entails, who is in charge of it, and the training required to ensure your company is abiding by the law.Who is responsible for safety at workplaces?Employers are liable for all workplace health and safety issues under British law. Occupational�Health and Safety Act, etc. Act 1974�outlines the essential duties of employers to safeguard their employees and what information they must give workers. This act highlights the following measures:routinely performing and taking action on risk assessmentsselecting qualified individuals to supervise health and safetyputting emergency plans in placegiving employees the training they require for their jobsEmployees must ensure they are working safely out of respect for themselves and their coworkers. This entails adhering to their workplace�s health and safety policies and informing a health and safety representative of any potential problems.Importance of fire safety in the workplaceThe possibility of fire is one of the most significant risks in any workplace. In 2019, there were over 300 fire-related fatalities and numerous significant injuries in the UK alone. The rapidness with which a small fire can spread throughout a building, obstructing exits and reducing sight poses a particular concern in workplaces. For this reason, each company must have a comprehensive fire plan and authorised fire marshals to oversee the process.�Fire Strategy ResponsibilityEmployers, owners, or landlords ensure that everyone who lives or works on their property is safe from fire, as stated in the�Regulatory Reform (Fire Safety) Order 2005. Among their responsibilities to individuals covered by their provision are:conducting frequent inspections of the site�s fire risk assessmentseducating employees on the threats, they�ve discovered and putting in place suitable fire safety measuresmaking emergency plansproviding workers with training, education, and information on fire safetyEmployers frequently designate a staff member in the fire marshal/warden job to supervise all fire strategies, depending on the type and size of the firm in question. This would entail evaluating the fire risk and establishing an evacuation plan. These wardens typically submit direct reports to the employer to ensure that company-wide fire safety procedures are followed.Content of fire safety training at workAll employees must get training on �the appropriate precautions and actions� to save themselves and other relevant persons on the premises,� according to the Fire Safety Act of 2005. Simply defined, it is the employer�s responsibility under the law to see new hires receive fire safety training pertinent to their workplace.Workers will require additional training if they are relocated to a new place of employment, if their duties change, or if they are exposed to new equipment that could be a fire danger. This instruction should teach participants about potential fire dangers, preventative measures, and what to do in the case of a fire.Fire Marshal TrainingAnyone in charge of managing fire safety at a company needs to have the necessary training. The�Fire Marshal (Fire Warden) course, which is Level 2 Award in Fire Safety at Hurak offers professional fire safety training.This online course gives you all the knowledge you need to carry out your duties in line with current legal requirements. Throughout the course, students will receive critical information on subjects like:An overview of how to recognise fire risks and carry out risk analysesThe fundamentals of coordination and evacuation during a fire, including fire drillsSafe and effective use of fire extinguishers�Description of the several fire classifications and each one�s unique characteristicsUsing and maintaining smoke and fire alarmsThe candidates must complete a brief multiple-choice exam after the course. If they are successful, they will receive a certificate and ID card, valid for 3 years, as proof that they are knowledgeable enough to perform the duties of a fire warden.Fire Safety AwarenessOur Fire Safety Awareness course is an excellent place to start if you�d want a more comprehensive introduction to workplace fire safety. Students will get a theoretical understanding of important subjects like:Causes of fire�Prevention of fireWhat to do during a fireUsing fire extinguishers correctlyEvacuation procedures in an emergency�Every employee should take this course since it satisfies the employer�s requirement to provide fire safety training to all new hires. Anyone wishing to improve their studies and become a certified fire warden could find this a valuable introduction to fire safety.Do I need the training to use a fire extinguisher?To prevent making the situation worse, you must have a basic awareness of the many types of flames and the available extinguishers before using one. Fire extinguisher training will provide professional insight and instruction on efficiently utilising this apparatus.�If you are interested in learning more about health and safety, visit�Hurak blogs, where we go into great detail on how learning functions and how it may help you. A�complete list of our online courses�is also available on our website.Call us at 0333 344 1293 if you have any additional questions about our courses or want to talk with a staff member. You can contact Hurak via email at�[email protected]�as well.
Health and Safety Risks on Construction Sites
It is quite difficult to manage health and safety in the construction industry. Anyone who enters a construction site runs the danger of getting hurt, making it one of the riskiest locations to work. That�s why most contractors in the UK ask for the CSCS Labourers Card, which is a physical testament that the workers have the entry-level skills and knowledge to work on the site. To get a Labourers Card, you need to complete the CSCS Green Card (Labourers Card) Course. Hurak offers the CSCS Labourers Card Course online as well as in classroom mode.Health and safety should be a top consideration on any construction site, whether residential or commercial. The potential health and safety risks include working at heights, using large equipment, and moving goods about the building site.In the UK, 80,000 construction workers experience work-related ill health each year, and 64,000 sustain non-fatal injuries, according to HSE. The 2016�2017 year saw 30 fatalities related to construction. This blog lists a few of the major ailments, accidents, and fatalities that occur in construction.Air-Borne Fibres and ToxinsAccording to HSE, 18,000 new cases of breathing issues1 are self-reported yearly, and there are 12,000 deaths from work-related lung diseases. Even though our sector is not entirely to blame for these issues, it is a major one. Many of these disorders take years to manifest, giving people a false sense of security and making it difficult for workers and their managers to enforce PPE properly.The atmosphere of construction has many potential sources of lung harm. These consist of:Stone masonry-related dust, debris removal, and general site cleanupWhen installing carpet, toxic fibres can become air-borne. Isocyanates can also be inhaled as an ingredient in paints, varnishes, glues, flooring, and building insulation materials.A variety of wood dustBreathing in these particles can cause various illnesses, including lung cancer, silicosis, COPD (chronic obstructive pulmonary disease), occupational asthma, and silicosis.AsbestosAsbestos is a significant contributor to deadly respiratory diseases. When annual lung disease deaths are broken down, asbestos-related lung cancer accounts for 20% of the total. In the UK, there are almost 500,000 public buildings that contain asbestos. Older buildings have hazards for the unwary, especially electricians, including ceiling tiles, thermal paper and wall plaster, insulation, cement siding, switchgears and circuit breakers.It is important to emphasise that asbestos poses a unique risk because a worker�s family may be at risk if they bring the dust home. When a family member is exposed to asbestos dust, a condition known as para-occupational or secondary exposure, they are also at risk of respiratory problems.According to legal requirements for duty holders, the occupants of buildings or sites must be adequately protected from asbestos-related risks. Providing asbestos awareness training to those who might come into contact with asbestos is one way to uphold your duty of care.Collapse10 of the 137 workers who died at work in 2016�2017 did so due to an object collapsing. People who labour around or excavate are in danger since there are several potential outcomes. These consist of:entering an excavationthe vicinity of an excavation becoming unstable and collapsing as a result of additional weights (like scaffolding or vehicles)compromising the stability of neighbouring buildings, resulting in their collapseInjury from falling objects when the excavation�s structural integrity failsManual HandlingLifting, carrying, lowering, pushing, and pulling items and material loads are manual handling tasks. Although many other types of injuries are connected to material handling (bruises, punctures, fractured bones), soft tissue damage�damage to muscles, ligaments, tendons, discs, cartilage, and nerves�is the most frequent.Soft tissue injuries typically impact the lower back, hips, legs, knees, ankles, and feet in addition to the neck, shoulders, elbows, arms, wrists, and hands. They may occur instantly or develop over time as a minor ache that gets worse with time. The degree of pain associated with the injury can range from mild to moderate discomfort to severe pain and the possibility of long-term disability. Enrol in a manual handling course to learn the correct way to handle things and prevent further damage. To further prevent manual handling injuries, follow the construction site signage to ensure clear safety signage in high-risk areas.�NoiseIn the UK, there were 1,505 new claims for work-related deafness between 2007 and 2017; according to HSE, 1495 men and 10 women were among them. Potentially dangerous noise levels on construction sites provide challenges. The issue is that workers frequently neglect to use the recommended hearing protection since site noise levels can change. The inappropriate hearing protectors may also be provided, making people less willing to wear them and providing additional risks such as the inability to hear a warning call or an improper fit with other PPE.Slips and TripsAccording to HSE, several thousand people are hurt on the job each year in the construction sector, and about 1,000 of those suffer a dislocated joint or a broken bone. With around 40% of all reported injuries being slips and trips, they are the most prevalent non-fatal workplace injury. Slips and trips are important because, in most cases, dangers may be readily avoided with good work area management.Working From HeightWith approximately 50% of all fatal injuries in the construction profession occurring from working from heights in 2016�2017, this practice remains one of the leading causes of fatalities. Working from heights can present several risks, including:apertures without guards and a lack of guardrailsinsufficient edge protectionUnsecured scaffolding or laddersOn roofs and high pathways, loose tools and/or carelessly stored materialsUpon successfully completing the course, you will instantly receive a digital certificate in spectator safety accredited by CPD and Highfield. You can print the certificate and keep it for future recordExhaustionConstruction work can be very taxing and frequently necessitates long shifts of physically demanding work in occasionally inclement weather. Although it isn�t frequently mentioned as a severe concern, tiredness plays a role in many accidents on construction sites. A worker�s level of attentiveness declines when they are physically or psychologically worn out, leading to careless choices and expensive errors.SuicideSuicide is the leading cause of death, surpassing falling from heights. The UK outnumbers all other nations. The suicide rate for low-skilled male construction workers is over four times greater than the national average, according to the Office for National Statistics, making suicide 63% more likely in the construction sector than in any other reporting group. According to the statistics, 1,047 of the 10,688 �people in-work� suicides documented between 2011 and 2015 involved the construction business, making up a little over 13% of the total. Unexpectedly, mental health is the biggest concern in the construction sector rather than physical health.Why do people commit suicide more frequently than in other industries working in the construction sector? According to some, the job�s precariousness�combined with its low pay, exploitation, and bullying�is to blame.Moving ObjectsConstruction sites are frequently bustling with activity, and without proper workplace management, being struck by a moving object can become dangerous, similar to slips and trips.Several factors can cause a worker to be struck by a moving object. These consist of:crowded and disorganised workspaces that prevent safe manoeuvringlack of beepers or warning lights on moving carsunlit workspacesconcentrating while near moving itemsstumbling into moving objects like machinery, pallets, or boxesthe absence of warning signs at crossroads with trafficHand and Vibration SyndromeA worker will get hand and vibration syndrome (HAVS) if they always utilise handheld power equipment. HAVS is easily avoidable, but once it�s there, the damage is irreversible. Tingling in the hands, fingers, and/or numbness are among the earliest signs of HAVS. If untreated, dexterity deteriorates, and touch receptor function is compromised. This makes it difficult for workers to grasp objects properly, which leads to a variety of issues, such as making it difficult to hold onto a tool or even to pour a drink of water.ElectricityExposure to electrically live parts is dangerous. Direct contact with live parts can cause harm, as can indirectly contact with a conducting object or material. Each year, 1,000 electrical accidents at work are reported, according to HSE. The majority of these mishaps are caused by coming into contact with overhead or underground power cables, as well as electrical apparatus. Ladders, scaffolds, and other work platform falls are frequently brought on by electric shocks. Additionally, there are an increasing number of electrocutions involving people performing electrical work on building sites who are not licenced electricians.
Do's & Don'ts of Construction Safety
One of the most dangerous workplaces in the world is the construction site, but it is also one of the most neglected. In addition to the high number of accidents and injuries that occur there, these situations could endanger the lives of those concerned. For this reason, construction workers should be more cautious than those in any other profession.�We�ll go into the do�s and don�ts in construction to decrease workplace accidents and ensure your safety and, more importantly, the lives of your team to assist you in avoiding the unpleasant risks that might arise on-site. Construction sites will no longer be frightening if these rules are carefully followed.DO's1. Wear Safety Equipment At All TimesNo matter how high or low a worker�s platform is, there will always be a chance of rubble or other things falling on them. Workers could suffer an injury or pass away if anything fell on their heads. To protect your head from any debris that might fall from above, you should, at the very least, wear a hard hat the entire shift. Wearing gloves and high-visibility clothing, like any other safety equipment, protects your hands and improves your ability to see while you are in a potentially dangerous environment. Safety glasses are advised to protect your eyes from dust or sparks, and boots are encouraged owing to their endurance.2. Learn Site SafetyAlthough most of a construction worker�s abilities can be gained on the site, it is preferable to acquire safety knowledge before entering the site. The majority of the contractors in the UK require the labourers to have a CSCS Labourer Card, which is a testament that the worker has qualifications to work on a site. To apply for a CSCS Labourer Card, the workers need to complete the CSCS Green Card (Labourers Card) Course, also known as the CSCS Labourer Card Course, through which they will learn safety regulations and health-related topics like manual handling, hazardous substances, welfare facilities, etc. Experienced personnel should also enrol in the CSCS Labourer Card Course once every five years to increase/refresh their understanding of building standards for safety. These training sessions will cover anything from basic safety precautions to techniques that could save lives, like how to use a ladder safely. The main objective is to ensure that everyone is thoroughly trained. The employees ought to be aware of the safety precautions that must be taken in the event of an occurrence after these training sessions. .second-cta-block .main-heading { font-weight: bold; font-size: 22px; } .second-cta-block .book-now { background: #DF3D52; color: #FFFFFF !important; border-radius: 8px; } .second-cta-block .second-heading { font-size: 17px; } .second-cta-block .card { border: 0 !important; } .second-cta-block .card-body { border: 1px solid #909090; box-shadow: rgba(0, 0, 0, 0.16) 0px 1px 4px; border-top-right-radius: 100px; border-bottom-right-radius: 100px; background: #ECECEC; } .second-cta-block .image-wrapper { height: 134px; position: absolute; right: -100px; top: calc(50% - 67px); /* Center the image vertically */ } .second-cta-block .image-wrapper img { height: 100%; } .second-cta-block .trustpilot-widget { width: 256px; } .cta-heading-section { width: 75%; } @media screen and (max-width:991px) { .second-cta-block { padding-top: 100px; } .second-cta-block .card-body { border: 1px solid #909090; box-shadow: rgba(0, 0, 0, 0.16) 0px 1px 4px; border-radius: 19px; border-radius: 14px; background: #ECECEC; } .cta-heading-section { width: 100%; padding-top: 50px; } .second-cta-block .image-wrapper { height: 134px; right: 0; position: absolute; left: calc(50% - 108px); top: calc(50% - 203px); } } RQF LEVEL 1 COURSE for CSCS GREEN CARD Check the Course Rated Excellent on major review sites 3. Keep An Eye on Your Surroundings At All TimesAnyone entering a building site should always keep an eye out for potential dangers because there are nearly always many activities occurring at once. It would be best if you always kept an eye out for them wherever you travel because doing so will prevent catastrophic injuries. Examples include:Pits.Construction equipment.Beams moving about the region.Other risky parts of an incomplete building.Additionally, you must never talk on the phone or interact with others while operating machinery that needs close attention.4. Stay Close to The ForemanTo work effectively, supervisors should always ensure the safety of their construction crews. The foreman�s responsibility is to direct the personnel performing duties across the site. A foreman�s knowledge of construction safety places them in a leadership position that cannot be disregarded. Even if a safety issue isn�t immediately obvious, always pay attention to what they say about what is safe and what isn�t.5. Inform the Workers About Site HazardsEvery worker must be properly informed and aware of the potential risks before entering any construction job site, regardless of their position or degree of expertise. Unskilled or ignorant workers may pose the greatest risks to any company since they may unintentionally endanger those around them. The best method to avoid injuries or accidents is probably to fully comprehend the dangers around you and to maintain a constant level of attention.Essential safety training is required in workplaces where accidents and fatalities are more likely; doing so will help you avoid terrible events that will harm your reputation and finances. Even though training sessions are held all year long, construction workers would enforce safety regulations more effectively if they applied and practised the skills they learned there. Without the proper training, employees risk severe or even fatal injuries.6. Use Proper EquipmentYou need to provide your employees with the appropriate tools and a suitable workspace for the task at hand if you want to foster a culture that prioritises construction safety. Construction site safety is impossible without the right tools because there is always a danger of getting hurt when using the incorrect ones. With the wrong equipment, construction workers are sure to make serious, even fatal, mistakes. In addition to ensuring that every piece of equipment on the job site is appropriate for the task at hand, construction companies also need to ensure that all equipment is kept in good working order.7. Take a Break When NeededWhile putting in a lot of effort should always be viewed as rewarding, it�s okay to take a break occasionally. Taking a break before returning to work helps employees maintain their vitality. Make sure breaks don�t go any longer than they have to.DON�T1. Wear Anything Unsuitable on a Construction SiteCasual attire won�t keep workers safe while at work; baggy pants or skirts are more likely to cause injury than work pants, and steel-toed boots will always provide more protection against heavy objects than trendy running shoes.2. Wandering Into Unsafe AreasIt�s not always safe to enter a building site just because it�s large and has numerous places. Significant liabilities may result for the contractor and other parties. The dangerous spots should be suitably designated with cones and signage to deter workers or anyone from entering risky areas.3. Use Equipment You Are Not Familiar WithSome employees are better than others at using specific pieces of equipment. Although it could appear simple initially, employees shouldn�t utilise any new tools without supervision. Commercial real estate work is expensive enough as it is, and untrained workers run the risk of harming or destroying site property.
Differences Between Risk Control and Hazard Control
Identifying threats is one of the first tasks you must take when conducting a risk assessment. You can then evaluate the hazards after this. But how do hazards and risks differ from one another?Since the terms, risks and hazards are frequently used interchangeably, you are not alone in wondering what the distinction is.The two terms are synonymous. There is no risk if there is no hazard. But they differ, and comprehending those variations is crucial to risk analysis. Let�s examine the distinctions between hazards and risks and their relationships. What is a Hazard?Anything that has the potential to be harmful is a hazard. A risk can result in loss, harm, death, or other adverse outcomes.There are risks in almost every workplace, family, and setting. A material, piece of equipment, activity, working approach, or process could all be hazards. We are legally required to identify dangers at work when performing risk assessments.Let�s first define a risk before we examine the risk connected to this hazard. A forklift truck, for instance, could be a risk. Both individuals who use it and those who work close to it could be harmed by it.What is a Risk?A risk is a possibility that the hazard will cause harm to someone. A risk evaluates the likelihood and severity of a potential injury.The risk is evaluated based on the possibility of harm occurring and the severity of the injury. When these two criteria are taken into consideration, a risk may be large or low.The likelihood and severity are calculated to determine the risk level. When looking at how a risk assessment was conducted, you will frequently encounter a risk matrix, such as this:The degree of harm could be anything from minor, short-term damage to serious, permanently disabling injuries or death. The risk of harm from the danger can be anywhere between very rare to quite likely.Implementing Risk ControlGenerally speaking, there are six risk-controlling actions you can take:EliminateSubstituteIsolateEngineering controlsAdministrative controlsPersonal protective equipment (PPE)EliminationThe eradication of a hazard is not always possible, even though it will always be the best course of action. The risk of someone being exposed to a hazard is automatically eliminated if hazards can be removed entirely. An illustration of this would be the risk of lead poisoning that existed in the past for people working at gas stations and other occupations that required frequent contact with petroleum. Two initiatives�the self-service gas pump and the removal of lead from petroleum�have eliminated that risk.Substitution of the Hazard with Lesser RiskWhile replacing the risk may not eliminate all of the dangers connected to a given process or activity and may even introduce new risks, doing so should nevertheless lessen the overall risk of injury or adverse health impacts. For instance, painting a house�s gable end would need you to work at the top of a ladder while someone else supported the ladder below you. Scaffolding might be used in place of a ladder. While the sturdier platform wouldn�t remove the risk of falling, it would make working conditions much safer.Isolation of the HazardWhen isolating a hazard, this can be done by limiting access to plant and/or equipment, or in the case of poisonous or explosive materials, by putting them away in a safe container and doing so under stringent supervision. While installing noisy equipment in an inaccessible enclosure or room isolates the hazard from people, a fume cabinet can isolate the risk from people nearby if you�re utilising specific chemicals (s). The appropriate and secure storing of fireworks during a display is a prime illustration of this.Engineering ControlsThe term �engineering� here can be slightly misleading as we are not discussing mechanical or electrical engineering. What is meant by the use of the word �engineering� is as an alternative to the words� devising�, �designing� or �redesigning� a process to place a barrier between the person(s) and a hazard or removing the hazard entirely from the person�s vicinity, such as machinery guarding, proximity guarding, extraction systems or removing the operator to a remote location away from the hazard.Administrative ControlsWhen discussing administrative controls, we refer to how things are carried out and how individuals collaborate to finish a task. To reduce any risk of injury and/or adverse health impacts, administrative controls include implementing standard operating procedures, safe work practices, and/or providing adequate and sufficient training, teaching, or information (s).Personal Protective EquipmentGloves, glasses, earmuffs, aprons, safety shoes, and dust masks are a few examples of personal protection equipment (PPE), all intended to reduce exposure to specific risks. PPE is typically employed in conjunction with one or more of the other control measures discussed above and is typically considered the last line of defence. It is well known that single-use dust masks cannot consistently produce and maintain an effective seal around the nose and mouth, which can cause a harmful false sense of security and, as a result, an increased risk. This is an example of the ineffectiveness of this control strategy. When this is the case, a dust extraction system with fitting air respirators may be preferred, especially if utilising chemicals containing isocyanate poses a risk of severe health impacts even at extremely low exposure levels.Difference Between Hazard and RiskA risk can take many forms because danger may be harmful in various ways. For our example of a hazard, we employed a forklift. The operation of a forklift truck has the potential to cause harm in several ways, including:Contact with pedestriansOverturningContact with other vehicles or machinesDropping the loadUnauthorised useBy putting management practises in place, the risk can be reduced. Keep in mind that likelihood and severity determine the danger. To ensure that even if an employee was exposed, the amount would be so little that the consequences would be minimal, the severity may be decreased, for instance, by only permitting a very small amount of the material to be obtained. By establishing ventilation and exclusion zones, mandating the use of personal respiratory equipment, and enforcing these measures, the chance of dangerous exposure could also be decreased.To ensure that something with the potential to cause harm (the hazard) cannot actually cause harm or that the harm is minimised, a combination of control measures can drastically lower the risk level (the risk). A work may frequently be labelled as high risk when it is actually high hazard. A task or activity need not be high risk just because it entails risks. Hazardous work can be made safe if each risk is managed so that the activity may be completed without incident. The risk is still present, but it is under control.At Hurak, we specialise in offering online courses that cover a wide range of workplace health and safety topics. Feel free to contact us if you have any questions or want more information on any of these.